Rug-Lock - Hold on Carpet
Product Code: rtRL
FANTASTIC GRIP ADHESIVE
LANDOCOL Made in Switzerland
Rug Lock is used to stop rugs from moving on carpetted floors. Its supertight, tacky grip enables it to hold any type of rug on carpet and prevent corners from flipping up. Rug lock is washable and comes with a foil backing to help make installation mess free and easy!
Approx. 2mm thick
Comes foil-backed for easier installation
Ideal for lightweight rugs, dhurries and high-traffic areas
Rugs adhere as if glued
Wheelchair resistant (subject to a suitable top material)
Can be easily cut to size with household scissors
Works well with heated floors
Helps to extend the life-span of your rug
Enhances walking comfort
Improves sound absorption
Free of plasticizer
Non-ageing and non-rotting material
Unit Weight: approx. 180 g/m²
Thickness: approx. 2.0 mm
Heat Conductibility λ: approx. 0.038 W/m·K
Thermal Resistance R: approx. 0.053 m²·K/W
For best grip to any floor surface: The floors must be free of: dust, fluff, wax and grease.
Sizing & Pricing
Choose the closest size to your rug. With Rug Lock you can simply trim it to your exact desired size with just plain household scissors.
Rug underlays should extend to within 50mm of the edge of your rug. Sides can be butted together without any tape or adhesive.
(2 foot, 24 inches wide)
$14.00 per metre ($15.40 inc GST)
(32 inches wide)
$19.00 per metre ($20.90 inc GST)
(3 foot, 36 inches wide)
$21.00 per metre ($23.10 inc GST)
(4 foot, 48 inches wide)
$28.00 per metre ($30.80 inc GST)
(6 foot, 72 inches wide)
$42.00 per metre ($46.40 inc GST)
If your rug is bigger, you can double up for the exact same effect!
200cm wide will be made up of one piece of 80cm laid next to a piece of 120cm
240cm wide will be made up of two pieces of 120cm laid next to each other
300cm wide will be made up of one piece of 120cm laid next to a piece of 180cm
360cm wide will be made up of two pieces of 180cm laid next to each other
RUG-LOCK Instructions - for rugs on any floor!
RUG-LOCK is guaranteed to hold any rug flat in place on all floors.
RUG-LOCK is made with a special non-aggressive dry adhesive that will adhere to carpeted or polished floors but is not transferable. RUG-LOCK cannot damage any rug or carpet. In fact, it adds to the life of both by reducing friction.
How to apply your RUG-LOCK:
- Vacuum the carpeted area thoroughly and make sure the back of your rug is clean and free of dirt.
- Place the rug face down, apply RUG-LOCK to the back of the rug with the poly foil side up, turn the rug together with RUG-LOCK and place it in the exact location you have selected.
- Fold the rug back half-way. Peel the foil off the expected half of the rug. Cut the foil off at the centre of the rug.
- Fold the completed half of the rug back onto the carpet, making sure it is smooth.
- Fold the other side back half-way and repeat the process outlined above.
Note: For small size rugs, 60cm x 120cm up to 90cm x 150cm, it may be simpler to apply the RUG-LOCK in one step without folding)
"Thank you!! Rug lock is the first thing that has EVER stopped our big rug from moving across the carpet. Very pleased !!!!"